Max Doser DM4A Moisture Meter

Features for the DM4A include

• The pocket size, robust, handheld, electronic moisture meter is suitable for a quick determination of moisture in a number of applications. The materials are merely touched and the % moisture appears on the display, (approximately one reading every 2 seconds).
• The depth of penetration of the measuring field into the material is approximately 30mm, so the moisture in low lying layers is obtained as well.
• The average moisture is shown as a percentage (%).
• No more time-consuming preparations, ie. drilling of holes etc.
• Supplied in hard carry case which is foam lined.

Other features include

• Easy material group setting by means of a membrane-type keypad - the adjusted material group can always be seen in the display.
• Microprocessor controlled measuring with automatic zero-point correction.
• Up to 10 different customers’ specific linearisation curves, with up to 8 free programmable linearisation points can be implemented.
• Storage for 100 moisture values.
• Automatic calculation of maximum, average and minimum value.
• Fixed linearisation curves for a lot of common materials are already stored and can be selected.
• The instrument’s calibration can be checked with the optional calibration modules PE05 and PE30.

Optional Extras

• Software DMI-Controller which includes RS232 serial interface cable for connecting to a PC.
• Different settings can be chosen and measured and stored. These values can then be transferred to the PC for analysis and reporting.